4.8 x 25mm anthracite grey façade and cladding screws manufactured from corrosion-resistant A2 304 stainless steel. Designed for fixing coloured façade panels, HPL compact laminate boards, solid-core cladding panels and fibre-cement boards to timber battens or wooden substructures.

The wide 12.3mm low-profile dome head spreads the fixing load across the panel and provides a neat, professional finish. Its RAL 7016 anthracite grey coating blends discreetly with matching grey cladding, helping the exposed fixings remain unobtrusive.

The TX20 Torx drive provides secure driver engagement and helps reduce slipping during installation. These screws measure 4.8mm in diameter by 25mm long, with a 17mm thread length, and are suitable for external façade and cladding applications where good corrosion resistance and a colour-matched appearance are required.

Suitable applications include:

• Anthracite grey exterior cladding
• HPL and compact laminate façade panels
• Fibre-cement cladding boards
• Solid-core exterior panels
• Decorative wall and rainscreen cladding
• Fixing thin façade panels to timber battens

Specification: 4.8 x 25mm; A2 304 stainless steel; RAL 7016 anthracite grey; TX20 Torx drive; 12.3mm dome head; 17mm thread length; supplied in a box of 100.

Always check the cladding manufacturer’s fixing instructions, required pilot-hole diameter and minimum embedment before installation.